1 / 5
Model No. : | ZT-002 |
---|---|
Brand Name : | Zhongtuo |
Material Thickness : | 1.5 To 2.0mm |
Cangzhou, Hebei, China
Product beschrijving
Wat is strut-kanaal?
Stutkanaal wordt meestal gevormd door een metalen plaat, omgevouwen in een open kanaalvorm met naar binnen gekromde lippen om extra stijfheid te verschaffen en als een locatie om onderling verbonden componenten te monteren. Strut heeft meestal gaten van een soort in de basis, om onderlinge verbinding of bevestiging van de stut aan onderliggende bouwconstructies te vergemakkelijken. (overgenomen uit Wiki)
Automatische uni strut kanaal rolvormmachine kan worden gebruikt om 41x21, 21x21 gegleufde channnel, schaduwkanaal, C-kanaal in batch te maken en het hele proces is volledig automatisch.
Hier zijn enkele tekeningprofielen van uni strut kanaal voor uw referentie :
Op de markt is er een gewoon C Slotted-kanaal en bewaar dan gewoon het perforatiegedeelte.
Controleer in het volgende gedeelte de parameters van de machine :
MACHINE COMPONENTEN :
1 |
Manualdecoiler |
1 set |
2 |
Leveling Machine |
1 set |
3 |
Roll Forming |
1 set |
4 |
Hydraulic Cutting |
1 set |
5 |
PLC Control System |
1 set |
6 |
Hydraulic Station |
1 set |
7 |
Run-out Table-(Un-powered) |
1 set |
1. Decoiler 3 Ton passive de-coiler with brake device Outside diameter of coil: 550mm Inside diameter of the coil: 450mm |
||
2. Feeding and leveling rollers: Rollers: 4 steps, leveling Rollers: 9pcs Diameter: 80mm Leveling thickness: 3.5mm
Feeding
speed: 20m/min
Punching device
|
||
3. Main forming machine : 1) Forming steps: 18 steps 2) Outer diameter: 70mm 3) Machine frame (type): memorial arch frame, Thickness of memorial arch frame: 30mm
4)
Roller information: B. Quenched degree: 56-58°C 5) Shaft material: 45# steel with heat treat and hard chrome plated on the surface 6) Main motor power: 18.5kw, Reducer ratio: 1:14, Reducer Type: Hardened reducer 7) With cooling device
|
||
4. Siemens control system with English 1). PLC brand: Siemens 2). Transducer brand: Siemens 3). Automatic length and quantity measurement 4). Stop control switch, to ensure the safety of production 5). Control station: Used to control product length and quantity, automatically cutting to length and stop when required quantity is achieved. 6). Error for length needs to be easy to adjust. |
||
5. Gearbox transmission: Gearbox transport A. Gear material: 42CrMo B. Processing technical: hardening gear grinding processing C. Gear lubrication system: automatic oil drip by computer control, oil drip time and amount can be controlled according the needs. D.Gear cooling system: Automatic cooling circulation tank, which can guarantee not to exceed the gear temperature limit.
|
||
7. Non-stop hydraulic cutting device
1).
Servo motor power: 5.5kw 4). Hydraulic cutting after forming, no distorting or wasting. High level safety factor. |
||
|
Cangzhou, Hebei, China
Stuur uw aanvraag naar deze leverancier