PHE Type Heat Exchanger for Swimming Pool Heating

JIEMA PHE TYPE HEAT EXCHANGER FOR SWIMMING POOL HEATING is one-of-a-kind heating device that cope well with its mission concerning the heating of a giant swimming pool.

Sollicitatie

Our phe type heat exchanger for swimming pool heating has mainly two functions. One is for pre-warming, commonly known as increasing the temperature of the water from 5-10℃ to 28-30℃, while the other, for heat preservation. It will help our customers to maintain the water temperature within its most comfortable state so as to provide the swimmers with a stunning experience.

What we need for customizing a swimming pool Wide Gap Plate Heat Exchanger

1. Temperature of the heat producer

2. Inlet and outlet temperature of the water

3. Total time for pre-warming

4. Circulation volume of swimming pool water

5. Swimming pool capacity

6. Indoor and outdoor temperature

Main Features of Our Wide Gap PHE

Convenient cleaning

To clean the sheet mechanically, unscrew the clamping bolt in plate heat exchanger to loosen the binding of plate and then unload the sheet, featuring extremely convenient maintenance.

Small temperature difference at the end

As for water-water heat exchange, the lowest temperature difference at the end can be lower than 1 ℃ , which is extremely beneficial to the recovery of low-temperature heat energy.

Low dirt coefficient

The dirt coefficient of plate heat exchange is small for the following reasons: Violent turbulent flow of fluid causes low-possibility deposition of impurities; the dead zone of inter-sheet channel is small; the heat-exchanging surface made of stainless steel is smooth, which results in less corrosive attaching.

Advantages of Our Products

1. High Heat Transfer Coefficient

2. Saving installation space

3. Low contamination

4. Minimum heat loss

5. Applicability & standardization

Jiema Power&Certificate

◎ 10 years experience:heat exchanger and pressure vessel

◎ 2 production bases:Guangzhou,Hubei

◎ 5 Export market:Asia,Mideast,Africa,South America,America

◎ Strong technician team: 5 senior engineers who have over 15 years experience in heat transferring area

FAQ

1. C an plate and frame heat exchanger be replaced ?

Plate and frame heat exchangers are easily assembled and thereby spares such as gaskets and plates are all within the range of replacement. In addition, an entire unit is also customized-available as long as the drawing is provided.

2. H ow heat exchangers are classified ?

Heat exchangers fall into a growing rank of categories considering various criteria. For instance, there is liquid-liquid heat exchangers, vapor-liquid heat exchangers and liquid-vapor heat exchangers from the perspective of working fluids. Taking into consideration of the structure of heat exchangers, we further classify them into plate and frame heat exchangers, shell and tube heat exchangers, brazed heat exchangers and so on. Moreover, condensers, evaporators are examples of categorization from heat exchangers functions.