1 / 2
$1750.00
≥1 Ton
$1700.00
≥50 Ton
Model No. : | JIS G3445 |
---|---|
Brand Name : | Torich |
standard : | Gb,Astm,Jis,Din,Api |
Ningbo, Zhejiang, China
Product beschrijving
Auto -uitlaatsysteem STKM11A LADED STALEN BUIS
1.Details:
application |
Automobile and motorcycle Shock Absorber Pipe Hydraulic-cylinder Pipe Mechanical steel pipes for auto and motor parts Gas Spring pipe motor casing pipe |
size |
length--2~12m WT--2~5mm OD--10-20mm |
material | STKM11A |
Production process | ordinary high-frequency welded pipe |
Advantages | small diameter and thick wall |
Surface Quality | The internal and external surfaces of the steel tube are not allowed to have cracks, scabs, folds, delaminations, laps, and burns. Allows for scribes, scratches, misalignment of welds, burns, oxide scales, and external burr removal traces that are not more than a negative wall thickness deviation |
Inspection items |
chemical composition Tensile test Ultrasonic examination Eddy current flaw detection Bending test Flattening test |
2. Bij herstelbare tolerantie van de buitendiameter en wanddikte (mm)
Type of steel Tube | Dimension of steel tube | Permissible tolerance | ||
Average class | High class | |||
Hot-rolled (extruded and expanded) tube |
Outer diameter D | All |
±1% (min.+/-0.50) |
- |
Wall thickness | All |
+15%/-12.5% (min.+4.5/-4.0) |
- | |
Cold-drawn (cold-rolled) tube | Outer diameter D | 6~10 | ±0.2 | ±0.15 |
>10~30 | ±0.40 | ±0.20 | ||
>30~50 | ±0.45 | ±0.30 | ||
>50 | ±1% | ±0.8% | ||
Wall thickness | <1 | ±0.15 | ±0.12 | |
>1~3 |
+15% -10% |
+12.5% -10% |
||
>3 |
+12.5% -10% |
±10% | ||
Note: For hot-expanded tubes with outer diameter>35mm,the permissible tolerance of wall thickness is±18%. |
3. Longitudinale mechanische eigenschappen van stalen buizen
NO. | Steel Grade | Tensile Strength(Mpa) | Yield point(Mpa) | Elongation after breaking(%) | |
s<16 | s>16 | ||||
Not less than | |||||
1 | 10 | 335~475 | 205 | 195 | 24 |
2 | 20 | 410~550 | 245 | 235 | 20 |
3 | Q295 | 430~610 | 295 | 285 | 22 |
4 | Q345 | 490~665 | 325 | 315 | 21 |
4. Bij herstelbare afwijkingen van de productanalyse van de opgegeven limieten:
Element | Limiting values for cast analysis | Permissible deviatioon of the product analysis in % by mass |
C | ≤0.22 | +0.02 |
Si | ≤0.55 | +0.05 |
Mn | ≤1.60 | +0.10 |
P | ≤0.025 | +0.005 |
S | ≤0.015 | +0.003 |
Al | ≥0.025 | -0.005 |
5. THOWEN:
Ningbo, Zhejiang, China
Stuur uw aanvraag naar deze leverancier