1 / 1
Brand Name : | maxmach |
---|
Hangzhou, Zhejiang, China
Product beschrijving
Dit profielprofiel van het vloerdek vormt lijnmachine is de speciale uitrusting voor continu walsen en koudvormen op staalplaat. Het keurt het rollen van staalblad als grondstof goed, het decoilen, dan ononderbroken het rollen en koud-vormt zich, sneed automatisch aan de grootte en geeft het gebeëindigde paneel aan de verdediger uit. De vloerdek profielvormlijn neemt de PLC-besturing, wisselstroomfrequentie en snelheidsaanpassingstechnologie aan en realiseert de continue automatische productie, daarom is het echt een nieuw type energiebesparende en hoog-effectieve producerende apparatuur voor staalconstructies.
Technische parameters voor de vloerdekprofielrolvormlijnmachine
Item |
Para |
Remark |
|
Suitable material |
Type |
Galvanized steel sheet |
|
Thickness (mm) |
0.8-1.2 |
|
|
Yield Strength (Mpa) |
230-300Mpa |
|
|
Width (mm) |
1250mm |
|
|
Wt of the Coil (t) |
10T |
|
|
OD |
Φ1350mm |
|
|
ID |
Φ508 mm/Φ610mm |
|
|
Material of rollers |
NO.45 steel with chrome plate |
|
|
Forming Speed (m/min) |
About20M/min |
Not including cutting time |
|
Power Source |
AC380V ,50Hz, 3 Phase |
Depend on final design |
|
Total power(kw) |
About19.5KW |
Depend on final design |
|
Dimension (L×W×H, m) |
See the layout |
Depend on final design |
Componenten voor de vloerdekprofielrolvormlijnmachine
Name |
Model/Name |
Quantity |
Technical Description |
1.Decoiler system |
10TConic type of decoiler |
1set |
10T Conic type of decoiler |
2.Main forming system |
Guiding device |
1set |
1. Roller material:No.45 steel with surface hard chrome painted. 2. Roller inner supporting structure type: guide column 3. Planetary gear speed reducer motor driving, the back/forward rollers driven by chain, part of upper/lower rollers driven by gear 4.Cutting blade material Cr12 quenched treatment |
Roll forming system |
1set |
||
Post-cutting device |
1set |
||
3. Output system |
Product supporter |
1sets |
For supporting the finished panel |
4. Hydraulic system |
1set |
Hydraulic station |
|
5. Electric control system |
1set |
PLC Control, encoder automatic cutting in length Operation stage: button AC frequency for adjusting the speed |
Werkstroming over de vloerdekprofielrolvormlijnmachine
Decoiling → Guiding device → Roll forming → Punching → Post Cutting → Output de afgewerkte producten naar supporter
Verpakking en verzending over de vloerdekprofielrolvormlijnmachine
Meer over onze MAXMACH-groep
Hangzhou, Zhejiang, China
Stuur uw aanvraag naar deze leverancier