1 / 5
Model No. : | YJLSY |
---|---|
Brand Name : | HUAYUAN YONGTONG |
Type : | Insulated |
Beijing, Beijing, China
Product beschrijving
1. ALGEMEEN
Deze vermelde specificatie heeft betrekking op de structuur, prestaties, test- en verpakkingsinformatie van HV Power Cable zoals vervaardigd door Beijing Huayuan Gaoke Co., Ltd.
Zaken die niet in deze technische specificatie worden vermeld, worden onderhandeld door koper & leverancier. Dit document bevestigt de overeenkomst tussen beide partijen als technische overeenkomst van overeenkomst, tenzij anders vermeld in officiële schriftelijke bijlagen.
2. APPLICALBE NORMEN
De kabel die door Beijing Huayuan wordt aangeboden, moet als volgt worden ontworpen, vervaardigd en getest volgens de internationale normen:
Quality Control Standard |
|
ISO 9001 |
Quality Management Systems |
ISO 14001 |
Environmental Management Systems |
Component Material Standard |
|
IEC 60228 |
Conductors of insulated cables |
Cable Standard |
|
IEC 60840 |
Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um = 36 kV) up to 150 kV (Um = 170 kV) – Test methods and requirements |
3.CABLES STRUCTUUR voor 1C * 1400mm2 kabel
AL / XLPE / CWS / AL-PE / HDPE 38/66 (72,5) kV 1 * 1400/135 mm2
Structure |
Nominal thickness mm |
Nominal diameter mm |
1 Five(5) Milliken (segmental) aluminum conductor |
/ |
45.7±0.8 |
2 Semi-conductive tape |
0.14 |
46.3 |
3 Conductor screen(wrapping & extruding) |
2.0 |
49.7 |
4 XLPE insulation |
12.0 |
73.7±1.5 |
5 Insulation screen |
1.0 |
75.7 |
6 semi-conductive water blocking tape |
2.0 |
77.7 |
7 Copper wire screen with copper tape wrapping(gap) |
Sectional area 135.0 mm2(approx.) |
81.3 |
8 semi-conductive water blocking tape |
0.6 |
82.3 |
9 AL-PE tape |
0.21 |
83.0 |
10 HDPE outer sheath |
5.0 |
93.0 |
11 Semi-conductive layer (graphite coating) |
|
93.0±3.0 |
Gegarandeerde technische details
Especificações Técnicas do Cabo LXHIOLE(cbe) 1x1400/135 |
||
|
Required |
Offered |
Diâetro do condutor |
46.4mm |
45.7mm(nominal) |
Espessura nominal da isolaç.o |
12mm |
12.0 mm |
Diâetro exterior aprox. do cabo |
83.8mm |
93.0(nominal) |
Peso do cabo |
10kg/m |
9.68 kg/m |
Características Eléctricas |
||
Tensã fase-terra (Uo) |
38kV |
38kV |
Tensã máx. |
72.5kV |
72.5kV |
Tensã fase-fase (U) |
66kV |
66kV |
Resistência máx. DC (20º) |
0.0212ohm/km |
0.0212 ohm/km |
Resistência máx. AC (90º) |
0.0278ohm/km |
0.0278 ohm/km |
Capacidade |
0.51uF/km |
0.324 |
Indutâcia por fase (triâgulo) (Esteira) |
0.31mH/km 0.47mH/km |
0.529 mH/km (trefoil formation); 0.578 mH/km (flat formation) |
Corrente capacitiva por fase a 50Hz |
5.5A/km |
4.18 A/km |
Corrente de curto-circuito máx., condutor, Ti = 65º, Tf = 250º, 1s |
145kA |
141 kA |
Corrente de curto-circuito máx., blindagem, Ti = 75º, Tf = 200º, 1s |
15.1kA |
15.1 kA |
Circuito trifásico, disposiç.o horizontal, profundidade de 1,2m, temperatura do solo = 30º, resistividade térmica do solo = 1,0 K.m/W, factor de carga = 1.0, Modo de ligaç.o da blindagem das caixas de Junç.o: Cross bonded Both ends One ends |
1230A 930A 1210A |
1230A 930A 1210A (flat formation, phase spacing 250mm,and other meet request, max.) |
Cumprimento da Bobina |
500m +/-2% |
500m +/-2% |
Vida Útil |
35 Anos |
35 Anos |
Normas |
IEC 60840, IEC 60228 |
IEC 60840, IEC 60228 |
|
1. Alma de alumínio estanque, multifilar compactado, da classe 2, de acordo com a IEC 60228. 2. Composto semicondutor sobre o condutor. 3. Isolaç.o de XLPE. Tripla extrusã. Reticulaç.o por via seca. 4. Composto semicondutor aderente à isolaç.o. 5. Fita semicondutora hidroexpansiva. 6. Blindagem de fios de cobre. Secç.o nominal: 135mm2. 7. Fita de continuidade de cobre. 8. Fita semicondutora hidroexpansiva 9. Fita de alumínio, revestida a polímero, aplicada ao longo e aderente à bainha exterior. Bainha exterior de PE, tipo ST7.
|
Opmerking: Vijf (5) Milliken (segmentaal) aluminium geleider
Bedrijf
werkplaats
Pakket
Levering en betaling
Eer
Klant
Beijing, Beijing, China
Stuur uw aanvraag naar deze leverancier